ArangoDB v3.8 reached End of Life (EOL) and is no longer supported.

This documentation is outdated. Please see the most recent version at docs.arangodb.com

Numeric functions

AQL offers some numeric functions for calculations. The following functions are supported:

ABS()

ABS(value) → unsignedValue

Return the absolute part of value.

  • value (number): any number, positive or negative
  • returns unsignedValue (number): the number without + or - sign
ABS(-5) // 5
ABS(+5) // 5
ABS(3.5) // 3.5

ACOS()

ACOS(value) → num

Return the arccosine of value.

  • value (number): the input value
  • returns num (number|null): the arccosine of value, or null if value is outside the valid range -1 and 1 (inclusive)
ACOS(-1) // 3.141592653589793
ACOS(0) // 1.5707963267948966
ACOS(1) // 0
ACOS(2) // null

ASIN()

ASIN(value) → num

Return the arcsine of value.

  • value (number): the input value
  • returns num (number|null): the arcsine of value, or null if value is outside the valid range -1 and 1 (inclusive)
ASIN(1) // 1.5707963267948966
ASIN(0) // 0
ASIN(-1) // -1.5707963267948966
ASIN(2) // null

ATAN()

ATAN(value) → num

Return the arctangent of value.

  • value (number): the input value
  • returns num (number): the arctangent of value
ATAN(-1) // -0.7853981633974483
ATAN(0) // 0
ATAN(10) // 1.4711276743037347

ATAN2()

ATAN2(y, x) → num

Return the arctangent of the quotient of y and x.

ATAN2(0, 0) // 0
ATAN2(1, 0) // 1.5707963267948966
ATAN2(1, 1) // 0.7853981633974483
ATAN2(-10, 20) // -0.4636476090008061

AVERAGE()

AVERAGE(numArray) → mean

Return the average (arithmetic mean) of the values in array.

  • numArray (array): an array of numbers, null values are ignored
  • returns mean (number|null): the average value of numArray. If the array is empty or contains null values only, null will be returned.
AVERAGE( [5, 2, 9, 2] ) // 4.5
AVERAGE( [ -3, -5, 2 ] ) // -2
AVERAGE( [ 999, 80, 4, 4, 4, 3, 3, 3 ] ) // 137.5

AVG()

This is an alias for AVERAGE().

CEIL()

CEIL(value) → roundedValue

Return the integer closest but not less than value.

To round downward, see FLOOR().
To round to the nearest integer value, see ROUND().

  • value (number): any number
  • returns roundedValue (number): the value rounded to the ceiling
CEIL(2.49) // 3
CEIL(2.50) // 3
CEIL(-2.50) // -2
CEIL(-2.51) // -2

COS()

COS(value) → num

Return the cosine of value.

  • value (number): the input value
  • returns num (number): the cosine of value
COS(1) // 0.5403023058681398 
COS(0) // 1
COS(-3.141592653589783) // -1
COS(RADIANS(45)) // 0.7071067811865476

DEGREES()

DEGREES(rad) → num

Return the angle converted from radians to degrees.

  • rad (number): the input value
  • returns num (number): the angle in degrees
DEGREES(0.7853981633974483) // 45
DEGREES(0) // 0
DEGREES(3.141592653589793) // 180

EXP()

EXP(value) → num

Return Euler’s constant (2.71828…) raised to the power of value.

  • value (number): the input value
  • returns num (number): Euler’s constant raised to the power of value
EXP(1) // 2.718281828459045
EXP(10) // 22026.46579480671
EXP(0) // 1

EXP2()

EXP2(value) → num

Return 2 raised to the power of value.

  • value (number): the input value
  • returns num (number): 2 raised to the power of value
EXP2(16) // 65536
EXP2(1) // 2
EXP2(0) // 1

FLOOR()

FLOOR(value) → roundedValue

Return the integer closest but not greater than value.

To round upward, see CEIL().
To round to the nearest integer value, see ROUND().

  • value (number): any number
  • returns roundedValue (number): the value rounded downward
FLOOR(2.49) // 2
FLOOR(2.50) // 2
FLOOR(-2.50) // -3
FLOOR(-2.51) // -3

LOG()

LOG(value) → num

Return the natural logarithm of value. The base is Euler’s constant (2.71828…).

  • value (number): the input value
  • returns num (number|null): the natural logarithm of value, or null if value is equal or less than 0
LOG(2.718281828459045) // 1
LOG(10) // 2.302585092994046
LOG(0) // null

LOG2()

LOG2(value) → num

Return the base 2 logarithm of value.

  • value (number): the input value
  • returns num (number|null): the base 2 logarithm of value, or null if value is equal or less than 0
LOG2(1024) // 10
LOG2(8) // 3
LOG2(0) // null

LOG10()

LOG10(value) → num

Return the base 10 logarithm of value.

  • value (number): the input value
  • returns num (number): the base 10 logarithm of value, or null if value is equal or less than 0
LOG10(10000) // 4
LOG10(10) // 1
LOG10(0) // null

MAX()

MAX(anyArray) → max

Return the greatest element of anyArray. The array is not limited to numbers. Also see type and value order.

  • anyArray (array): an array of numbers, null values are ignored
  • returns max (any|null): the element with the greatest value. If the array is empty or contains null values only, the function will return null.
MAX( [5, 9, -2, null, 1] ) // 9
MAX( [ null, null ] ) // null

MEDIAN()

MEDIAN(numArray) → median

Return the median value of the values in array.

The array is sorted and the element in the middle is returned. If the array has an even length of elements, the two center-most elements are interpolated by calculating the average value (arithmetic mean).

  • numArray (array): an array of numbers, null values are ignored
  • returns median (number|null): the median of numArray. If the array is empty or contains null values only, the function will return null.
MEDIAN( [ 1, 2, 3] ) // 2
MEDIAN( [ 1, 2, 3, 4 ] ) // 2.5
MEDIAN( [ 4, 2, 3, 1 ] ) // 2.5
MEDIAN( [ 999, 80, 4, 4, 4, 3, 3, 3 ] ) // 4

MIN()

MIN(anyArray) → min

Return the smallest element of anyArray. The array is not limited to numbers. Also see type and value order.

  • anyArray (array): an array of numbers, null values are ignored
  • returns min (any|null): the element with the smallest value. If the array is empty or contains null values only, the function will return null.
MIN( [5, 9, -2, null, 1] ) // -2
MIN( [ null, null ] ) // null

PERCENTILE()

PERCENTILE(numArray, n, method) → percentile

Return the nth percentile of the values in numArray.

  • numArray (array): an array of numbers, null values are ignored
  • n (number): must be between 0 (excluded) and 100 (included)
  • method (string, optional): “rank” (default) or “interpolation”
  • returns percentile (number|null): the nth percentile, or null if the array is empty or only null values are contained in it or the percentile cannot be calculated
PERCENTILE( [1, 2, 3, 4], 50 ) // 2
PERCENTILE( [1, 2, 3, 4], 50, "rank" ) // 2
PERCENTILE( [1, 2, 3, 4], 50, "interpolation" ) // 2.5

PI()

PI() → pi

Return pi.

  • returns pi (number): the first few significant digits of pi (3.141592653589793)
PI() // 3.141592653589793

POW()

POW(base, exp) → num

Return the base to the exponent exp.

  • base (number): the base value
  • exp (number): the exponent value
  • returns num (number): the exponentiated value
POW( 2, 4 ) // 16
POW( 5, -1 ) // 0.2
POW( 5, 0 ) // 1

PRODUCT()

Introduced in: v3.7.2

PRODUCT(numArray) → product

Return the product of the values in array.

  • numArray (array): an array of numbers, null values are ignored
  • returns product (number): the product of all values in numArray. If the array is empty or only null values are contained in the array, 1 will be returned.
PRODUCT( [1, 2, 3, 4] ) // 24
PRODUCT( [null, -5, 6] ) // -30
PRODUCT( [ ] ) // 1

RADIANS()

RADIANS(deg) → num

Return the angle converted from degrees to radians.

  • deg (number): the input value
  • returns num (number): the angle in radians
RADIANS(180) // 3.141592653589793
RADIANS(90) // 1.5707963267948966
RADIANS(0) // 0

RAND()

RAND() → randomNumber

Return a pseudo-random number between 0 and 1.

  • returns randomNumber (number): a number greater than 0 and less than 1
RAND() // 0.3503170117504508
RAND() // 0.6138226173882478

Complex example:

LET coinFlips = (
    FOR i IN 1..100000
    RETURN RAND() > 0.5 ? "heads" : "tails"
)
RETURN MERGE(
    FOR flip IN coinFlips
        COLLECT f = flip WITH COUNT INTO count
        RETURN { [f]: count }
)

Result:

[
  {
    "heads": 49902,
    "tails": 50098
  }
]

RANGE()

RANGE(start, stop, step) → numArray

Return an array of numbers in the specified range, optionally with increments other than 1. The start and stop arguments are truncated to integers unless a step argument is provided.

Also see the range operator for ranges with integer bounds and a step size of 1.

  • start (number): the value to start the range at (inclusive)
  • stop (number): the value to end the range with (inclusive)
  • step (number, optional): how much to increment in every step, the default is 1.0
  • returns numArray (array): all numbers in the range as array
RANGE(1, 4) // [ 1, 2, 3, 4 ]
RANGE(1, 4, 2) // [ 1, 3 ]
RANGE(1, 4, 3) // [ 1, 4 ]
RANGE(1.5, 2.5) // [ 1, 2 ]
RANGE(1.5, 2.5, 1) // [ 1.5, 2.5 ]
RANGE(1.5, 2.5, 0.5) // [ 1.5, 2, 2.5 ]
RANGE(-0.75, 1.1, 0.5) // [ -0.75, -0.25, 0.25, 0.75 ]

ROUND()

ROUND(value) → roundedValue

Return the integer closest to value.

  • value (number): any number
  • returns roundedValue (number): the value rounded to the closest integer
ROUND(2.49) // 2
ROUND(2.50) // 3
ROUND(-2.50) // -2
ROUND(-2.51) // -3

Rounding towards zero, also known as trunc() in C/C++, can be achieved with a combination of the ternary operator, CEIL() and FLOOR():

value >= 0 ? FLOOR(value) : CEIL(value)

SIN()

SIN(value) → num

Return the sine of value.

  • value (number): the input value
  • returns num (number): the sine of value
SIN(3.141592653589783 / 2) // 1
SIN(0) // 0
SIN(-3.141592653589783 / 2) // -1
SIN(RADIANS(270)) // -1

SQRT()

SQRT(value) → squareRoot

Return the square root of value.

  • value (number): a number
  • returns squareRoot (number): the square root of value
SQRT(9) // 3
SQRT(2) // 1.4142135623730951

Other roots can be calculated with POW() like POW(value, 1/n):

// 4th root of 8*8*8*8 = 4096
POW(4096, 1/4) // 8

// cube root of 3*3*3 = 27
POW(27, 1/3) // 3

// square root of 3*3 = 9
POW(9, 1/2) // 3

STDDEV_POPULATION()

STDDEV_POPULATION(numArray) → num

Return the population standard deviation of the values in array.

  • numArray (array): an array of numbers, null values are ignored
  • returns num (number|null): the population standard deviation of numArray. If the array is empty or only null values are contained in the array, null will be returned.
STDDEV_POPULATION( [ 1, 3, 6, 5, 2 ] ) // 1.854723699099141

STDDEV_SAMPLE()

STDDEV_SAMPLE(numArray) → num

Return the sample standard deviation of the values in array.

  • numArray (array): an array of numbers, null values are ignored
  • returns num (number|null): the sample standard deviation of numArray. If the array is empty or only null values are contained in the array, null will be returned.
STDDEV_SAMPLE( [ 1, 3, 6, 5, 2 ] ) // 2.0736441353327724

STDDEV()

This is an alias for STDDEV_POPULATION().

SUM()

SUM(numArray) → sum

Return the sum of the values in array.

  • numArray (array): an array of numbers, null values are ignored
  • returns sum (number): the total of all values in numArray. If the array is empty or only null values are contained in the array, 0 will be returned.
SUM( [1, 2, 3, 4] ) // 10
SUM( [null, -5, 6] ) // 1
SUM( [ ] ) // 0

TAN()

TAN(value) → num

Return the tangent of value.

  • value (number): the input value
  • returns num (number): the tangent of value
TAN(10) // 0.6483608274590866
TAN(5) // -3.380515006246586
TAN(0) // 0

VARIANCE_POPULATION()

VARIANCE_POPULATION(numArray) → num

Return the population variance of the values in array.

  • numArray (array): an array of numbers, null values are ignored
  • returns num (number|null): the population variance of numArray. If the array is empty or only null values are contained in the array, null will be returned.
VARIANCE_POPULATION( [ 1, 3, 6, 5, 2 ] ) // 3.4400000000000004

VARIANCE_SAMPLE()

VARIANCE_SAMPLE(array) → num

Return the sample variance of the values in array.

  • numArray (array): an array of numbers, null values are ignored
  • returns num (number|null): the sample variance of numArray. If the array is empty or only null values are contained in the array, null will be returned.
VARIANCE_SAMPLE( [ 1, 3, 6, 5, 2 ] ) // 4.300000000000001

VARIANCE()

This is an alias for VARIANCE_POPULATION().

❮  Miscellaneous

© ArangoDB - Graph and Beyond